Retro-Reflective Beam Sensor Trigger

This top-quality “beam sensor” creates an invisible beam that when someone walks through will instantly “trigger” your prop.

Simply mount the reflective photoelectric beam detector on wall, mount reflector on the opposite wall, then connect the included wires to a 12VDC power supply and device to be triggered.

Works with all prop controllers.

• Weatherproof (IP 66) construction for indoor/outdoor usage
• Normally Open (NO) or Normally Closed (NC) Relay
• Dark ON operation (Light ON operation also available)
• Pre-wired 6 Feet Cord
• Includes Brackets and Mounting Hardware
• Adjustable sensing distance
• Compact Size
• Easy-to-Use Instructions included

*** REQUIRES 12VDC POWER SUPPLY – NOT INCLUDED.

Retro-Reflective Beam Sensor Trigger

Click here to order our 12VDC Power Supply.

Type NIR Retro-Reflective Sensing Range 0.5′ to 35′ (0.1 – 11m) Supply Voltage 12-240VDC or 24-240VAC Current Drain Standby Active 12VDC 20mA 40mA 24VDC 10mA 20mA Response Time 10ms (Max) Light Source IR LED LEDs Yellow LED (Standby)
Red LED (Active) Output SPDT Relay Output Switching Capacity 250VAC/1A, 30VDC/2A Enclosure IP 66 Waterproof Ambient Temp -4 to 131 F (-20 to 55C)